Re: ADTPro 1.1.2 Released

[schmidtd <schmidtd@my-deja.com>]

On Feb 19, 9:52 am, Eric Rucker <bhtoo...@gmail.com> wrote:
> Anyway, I haven't actually TRIED 1.1.2 yet, but is that "simplified
> UDP timeout processing" a fix for one thing that I HAVE noticed? When
> I fire up ADTPro, it takes several tries to connect to the ADTPro
> server over the Uthernet, with 1.1.1, with the host not being found
> until the third or fourth try (then it works perfectly)?
>
> I'll have to check that next time I use the GS, but I wanted to get
> that posted while I was thinking about it.
Alas, no - that was all part of the occasional "hang" that would
happen when the IP stack would get locked in a tight loop waiting for
a condition to change in the Uthernet card (which would not change
since we were banging on it so hard).

I see the exact same thing you do with having to do a bunch of D-Esc-D-
Esc-D-Esc sequences to get the Uther version to finally connect.  I
can't seem to figure out why it won't "go" out of the gate.  I've
tried several different things to no avail.  The client currently
sends a ping on startup (if you've previously configured the Ethernet
parameters) to hopefully cut down on the number of times you have to
do it yourself.  Maybe I should just try sending a bunch. :-)