Re: RGB card

[mojoehand <jgray@zianet.com>]

> The jumper may select a mode unrelated to the connector being used.

True. I am just guessing.

> The only 2-pin Molex connector I remember on the Apple II main board
> is the speaker connector (right side, toward user, if the board is
> oriented as it would be in a case).
>
> There is a 4-pin Molex connector with video and power on the right side
> of the board near the back.  This was used to connect RF modulators.

I just looked at my IIe. About 1/2 inch to the rear of the keyboard
connector is a 2-pin connector just like the one on the mystery card.
I'll have to find a IIe schematic to make sure, but I thought I read
somewhere that this was video. Yes, further back is the 4-pin
connector for a modulator.

> The 9-pin connector is probably not a CGA pinout, but an Amdek color
> monitor pinout.  The 16-pin connector is, as you surmised, for a 1:1
> (minus pin 16) ribbon cable to a Dx-15 connector for an Apple RGB
> monitor.