Re: RAMFAST rev C & D

[grent@wowway.com]

On Oct 13, 10:24 pm, Lockar <loc...@nowheretobefound.com> wrote:
>    Okay, I have RAMFAST SCSI rev C and D.  Neither one of them will see
> a hard drive connected to them.  I have tried three hard drives now
> with no luck.   The only thing I can think of is the SCSI ID.  Are both
> cards set to 0 or 7?  My hard drives are set at 0 and I don't have the
> jumpers to set the IDs.  Just wondering if that problem.
>
>       -Lockar

The HDs have to be SCSI type 1. It will work on a few type II SCSI.
Just because they are a SCSI they may not always work with a Ramfast.
Termination is another thing you did not mention. The last in the
chain should be terminated. Even if there is only one. The drives or
cable could be bad.

What were the HDs that you were trying to use? Make, Model and Size?

Take Care