Drew wrote:
Adding a small capacitor inside the joystick on (at least) the vertical axis will compensate for the lower resistance and make it work OK.Hi michael,...without sounding very green...how would i do that :-). I opened the joystick and there are 2 wires going to each axis.
An earlier responder IIRC referred to the capacitor fix. The cap can go between the two pot lugs for the vertical axis that have the two wires connected. I'd start with a failrly small value, like .005uF (5nF) and see what difference that makes. -michael AppleCrate II: An Apple II "blade server"! Home page: http://members.aol.com/MJMahon/ "The wastebasket is our most important design tool--and it's seriously underused."