Nama wrote:
Just a quick question, and maybe I'm reading the instructions wrong. On the Apple II and II+, a signal is taken from the 4 video pins just below the composite video out on the Apple II and II+ motherboard? If so, what does that mean for the Apple II Rev0 boards with no pins, or the Rev1 boards with just one pin?
The card just needs a convenient tap for the video signal. For the Rev 1, the 1-pin is the video signal. For the Rev 0, you could tap it at the RCA connector or somewhere nearby. (The 4-pin connector was added to the revised boards to make modulators easier to install.) -michael AppleCrate: An Apple II "blade server"! Home page: http://members.aol.com/MJMahon/ "The wastebasket is our most important design tool--and it's seriously underused."