Re: ZipGS Recommended Slot Speeds

["Bryan Parkoff" <nospam@nospam.com>]

>>Slot 1: SuperDrive Controller Card, set FAST
>>Slot 2: Nothing/set to Modem Port, set SLOW
>>Slot 3: Uthernet, set FAST
>>Slot 4: ZipGS, set FAST
>>Slot 5: Nothing/Set to Smartport, set FAST
>>Slot 6: Nothing/Set to the 5.25" drives, set SLOW
>>Slot 7: CFFA, set to FAST
>
> You should be able to set slot 2 to fast.  Everything else looks OK.

    I recommend to move ZipGS card into slot 3 instead of slot 4.  Make sure 
to set built-in 80-column in slot 3 instead of "Your Card".
    Uthenet card looks like ethernet card for network.  It can be put in 
slot 4.  Set slot 4 to "Your Card".
    ZipGS controller card does not have contact to the slot 3 because it is 
grounded or cut-off.  No current flow between ZipGS controller card and slot 
3 because it is not necessary.  It needs to sit in slot 3 so it is the way 
how slot 3 holds ZipGS controller card without falling down.  The current 
flow between ZipGS controller card and CPU socket help to speed up faster.
    You can always use 80 column while ZipGS controller card is set to fast.

Bryan Parkoff