Re: Yes, ADTpro again...

[Nama <forums6000@mac.com>]

On Sep 14, 12:43 am, schmidtd <schmi...@my-deja.com> wrote:
> On Sep 13, 10:30 am, Nama <forums6...@mac.com> wrote:> I can see the directory listings perfectly, and I can bootstrap at
> > 9600 no problem, I can connect to ADTpro AT 9600 19200, but 115200
> > seems elusive.
>
> > IN#2 and PR#2 both work from DOS. All this seems to work fine.
>
> > The problem is that it ADTpro hangs at "RECEIVING BLOCK 00001 of
> > 00280".
>
> Phil -
>
> Are you saying you can transfer disks successfully at 9600 and 19200
> baud, but not 115.2k?  If so, then I have no idea what's wrong short
> of hardware.  But if every speed causes the hang while receiving an
> image, then I suspect you have a mismatch of client and server across
> a boundary where the protocol changed.  Back in April, beta version
> 0.2.1 changed the serial protocol where block numbers were always
> transmitted as part of a packet.  I think that'll cause the behavior
> you see if you are using a client and server that straddle that
> version border.  What versions are you running?

Yes that the incompatible client and server versions seemed to be one
of the issues. So after much playing around, I can get my setup
working fine and consistent at 19200... but not any faster. I'm happy
that it works, and can live with the slower speed. Thanks for all
youir advice.