Re: IIe to OS9 Emulator Conversion

["Matt Lichtenberg" <kerobaros@gmail.com>]

Polymorph wrote:
> Not being all that familiar with Macs myself, if it has a serial port
> and the //e has a Super Serial Card, then the cheapest (and one of the
> fastest) methods would probably be hooking up the //e via a null modem
> serial connection. This can also be achieved using a straight thru
> cable and the appropriate setting on the SSC (jumper block pointing
> down).
>
> Your best bet would be to check out the A2 FAQ here:
> http://home.swbell.net/rubywand/Csa2T1TCOM.html#000
>
> And use ADTPro (which is an excellent update to ADT) here:
> http://adtpro.sourceforge.net/
>
> The ADTPro page also has helpful guides on how to get up and running
> with ADTPro, so make sure you check there first.
>
> If you have any questions, I'm sure that there will be plenty of
> people here to help you with the setup.
>
> cheers,
> -p

This whole message is QFT (quoted for truth), except that the iMacs
have no serial ports.  A USB to serial converter should do the trick
just fine, but I couldn't tell you which one.