[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Timemaster H.O.

> 
> What *are* the specs on the replacement batteries?  (They should be 3.6v
> and about 60-200mAh.)
 
Specs are 3.6v and 50 mAh

> 
> As I mentioned, the battery should be irrelevant when the card is
> installed and the computer is on.  Can you set the clock under these
> conditions?  (If the clock has not been set since it was powered off,
> it may not be running, which might be detected as "No Device connected"
> by the clock software.)
 
How do I set the clock if the computer can't see it? I tried running the 
BASIC program from both the original disk and the Timemaster owner's 
manual. Nothing is happening.