[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IIeuroplus boot problems
- Subject: Re: IIeuroplus boot problems
- From: "Peter de Vroomen" <peterv[at][spamblock]jaytown[dot]com>
- Date: Fri, 24 Jun 2005 19:15:28 +0200
- Newsgroups: comp.sys.apple2
- References: <MYRue.19604$D7.503986@twister1.libero.it> <niSue.89825$tt5.61534@edtnps90> <k6Tue.20171$yM4.300439@twister2.libero.it> <1119618040.908038.24520@g14g2000cwa.googlegroups.com> <VoUue.20332$yM4.302654@twister2.libero.it> <R7ydnUJi6oodtiHfRVn-rQ@comcast.com> <REWue.20342$D7.515240@twister1.libero.it>
- Reply-to: "Peter de Vroomen" <peterv[at][spamblock]jaytown[dot]com>
- Xref: g2news1.google.com comp.sys.apple2:12394
> > The 14.31818MHz crystal is the same as used on NTSC Apple II's.
>
> Michael, thanks, but you've been a little bit cryptic! :)
> Do you mean *all* II's (II+, IIe, //e, //c...) ?
> What about PAL II's. Is that you don't have any information about them or
> you know they use a different crystal?
14.31818MHz is typical for machines that are NTSC. For PAL, the crystal
typically is 17.73447MHz.
Just replace the crystal with another that has the marking 14.31818MHz. Or
try to resolder the broken leg if it's possible. Crystals cost something in
the order of $1.50, so it's not expensive or hard to get.
PeterV