Re: Undisk 3.5 and Plat 3.5 drive

[Lockar <lockar@apple2forever.DOTorg>]

    I used an 800k mech.  Sorry I didn't put a 1.44 mech in it.  I
guess I should have clearfied that..

       -Lockar


In article <-6GdnaojW-wkJCXfRVn-uA@comcast.com>, Bill Garber
<willy46pa@comcast.net> wrote:

> "Lockar" <lockar@apple2forever.DOTorg> wrote in message
> news:210620052058176559%lockar@apple2forever.DOTorg...
> :
> :
> : I've been reading some of the FAQ and I wanted to state that yes
> : it is possible to put a sony 3.5 drive mech in a UniDisk 3.5 drive.  I
> : had to do this because the ejecter on my UniDisk 3.5 wouldn't work.
> :
> : So I just replaced the mech and it works fine.  You might want to
> : add this to the FAQ.
> 
> Now hook it to a Superdrive card and see if it
> will write a 1.4 MB disk. Then we'll add it to
> the FAQ for sure.  :o)
> 
> Apple II Forever, Apple II Together
> Bill @ GarberStreet Enterprizez
> ---------------------------------------------
> Web Site - http://garberstreet.netfirms.com
> HOME OF THE RAM-4-GS
> ---------------------------------------------
> Email - willy46pa@comcast.net
> ---------------------------------------------
> 
>