Re: MPC AP-EP Eprom Programmer

[Bill Garber <willy46pa@comcast.net>]

in article Dq6qe.44276$on1.2314@clgrps13, Wayne Stewart at
waynes@telus.dotnet wrote on 6/9/05 9:55 PM:

> Bill Garber wrote:
>> Hi, I recently acquired one of these programmers,
>> but the seller had no software with it. I know that
>> I've heard of this programmer before and have seen
>> the disk image for it, possibly on Wayne Stewart's
>> site. If anyone has this software, I could really
>> use it now. Contact me here or through my email address.
> 
> If this is the same as the apparat EPROM programmer, you can
> find the manual and software here
> http://www3.telus.net/waynes/ap_eprom_programer/
> 
> Wayne

Thanks, Wayne, but, no, it's not the one. Sorry.
There is an example in the manual with it that
shows how to write one byte to it, so, from that
I may be able to write programs to read and write
from/to it. There are jumpers for 2516/2716, and
2532/2732 eproms, but it also says it can do 2708
and others. If I find/write software for it, I'll
scan the manual for it, and send that and the
software to you for archiving.

I also have the Exceltronix MultiFlex Eprom
Programmer, but I received that software from
someone, and have yet to try burning one. Have
read some, and that works fine.

If you like, I can scan both cards and send you
the pics. I know you like that sort of thing. Ok?

Thanks, 

Bill Garber 
Email - Willy46pa@comcast.net