Mirko wrote:
Sean,tanks for the hint, I made 3.5 drive the first in the chain, and checked the control panel, all I can see is that slot 5 is set as 'smart port' but slot 6 can only be set to 'disk port' there's not smart option on it...The drive still doesn't boot.. Mirko
<SNIP> Mirko,Slot 5 needs to be set as "Smart Port" and Slot 6 needs to be set as "Disk Port." There is no "Smart Port" option for Slot 6. Also make sure the Startup Slot option is set to "Scan". Hope this helps.
-- Damon Wicklund