Re: Doctor Design sound card -- how to install?

["Bill Garber" <willy46pa@comcast.net>]

<grent@comcast.net> wrote in message 1108910487.719183.208180@c13g2000cwb.googlegroups.com">news:1108910487.719183.208180@c13g2000cwb.googlegroups.com...
: Hi,
:  I wondered about these also, and what software would work or what was
: needed if any ?

Don't think any software is necessary. They get their signals
through the 7 pin molex to the right-front of the motherboard.

: > Heya. I just got a Doctor Design sound card in the mail and it's got
: > some funky connectors. Is anyone familiar with this card out there?
: I'm
: > looking to install it in my IIGs.
: >
: > Specifically, it's got a five-wire molex that I'm assuming would
: connect
: >   to some sound pins in my IIGs. Then it also has a two-wire molex
: that
: > I'm guessing is for power. (But doesn't it get power via the slot?)
:
: There were some of these in IIgs for sale on EBay a year back or so.
: Not sure about the 2 wire moles, could go were they plug in the fan or
: the HyperCard sound input device. That is located between the monitor
: and the drive DB sockets.  Might also try looking on EBay if they have
: any for sale in a IIgs. If I see One I will let you know.

The 2 pin molex goes to the speaker output on the motherboard,
for outputting the regular speaker sound through the sound card
and out of the set of external speakers. Most sound cards have
this.   :o)

Apple II Forever, Apple II Together
Bill @ GarberStreet Enterprizez
Web Site - http://garberstreet.netfirms.com
HOME OF THE RAM-4-GS
Email - willy46pa@comcast.net