Re: ADT - at a loss...

[Andy McFadden <fadden@fadden.com>]

Craig Bower <to.email.me@post.a.request.message> wrote:
> - Boot Apple II into DOS 3.3
> - Brun ADT
> - Setup ADTWIN on the PC side
> - Transfer standard issue DOS 3.3 dsk image to Apple from PC
> - Quit both ADT (Apple II side) and ADTWIN
> - Reboot 5.25" disk in Apple (power off - on OR ctrl-OA-Reset)
> - It won't boot.
> 
> Then if I run Master Create on the newly transferred disk, it'll boot fine
> and the actual programs are on the disk as they are on the PC side dsk
> image.

My concern would be that some sort of data corruption is going on, and
it's present in the rest of the disk but for some reason isn't noticeable.

If possible, copy a disk image to a real floppy, then copy the new floppy
back to Windows.  If you get I/O errors, you've identified one problem.
If not, you can try booting the new image with an emulator.  If that fails
the same way, we can compare the images to see what changed.

-- 
Send mail to fadden@fadden.com (Andy McFadden) - http://www.fadden.com/
CD-Recordable FAQ - http://www.cdrfaq.org/
CiderPress Apple II archive utility for Windows - http://www.faddensoft.com/
Fight Internet Spam - http://spam.abuse.net/spam/ & http://spamcop.net/