Re: Put Aplle II software on 5.25'' disk

[Oualid Burström <oualid.burstrom@telia.com>]

Michael J. Mahon wrote:
> Ralph Glatt replied:
>
>
> > mjmahon@aol.com (Michael J. Mahon) wrote in message
> > news:<20040811171409.15107.00001704@mb-m02.aol.com>...
> >
> > > oualid.burstrom@telia.com asked:
> > >
> > >
> > > > I have an PC with a 5.25'' floppy drive.
> > > > I downloaded some Apple II softwares from the net and I would like to 
> > > > copy them on the 5.25'' floppy.
> > > > My intention is to use this floppy in my IIc.
> > > > Is there any software for PC that can create Apple II disk image and 
> > > > copy it on a 5.25'' floppy disk and then use this floppy disk in my IIc?
> > >
> > > No.
> > >
> > > There is software available which can read Apple 5.25" disks on
> > > a PC, but the PC floppy controller is incapable of writing a Apple
> > > disk because it always writes in MFM mode.
> > >
> > > Your best bet is to link your PC with your Apple //c using a serial
> > > cable, and use software like ADT to transfer disk images to your
> > > //c for writing to Apple disks.
> > >
> > > Check the csa2 FAQ for more information.
> >
> > I told him as much in a different thread. I guess he didn't believe me. ;-p
>
>
> Yes, just after posting my reply, I found a very similar question in
> another of his posts, to which you replied.
>
> He doesn't seem to be very patient, so he may have trouble getting
> ADT working.  ;-)
>
> -michael
>
> Check out parallel computing for 8-bit Apples on my
> Home page:  http://members.aol.com/MJMahon/

Well, after reading FAQ carefully and follow the instructions I 
succeeded to transfer AII software from the PC to IIC.
Anyway I would like to thank all of you for helping me!