Re: SSC Manual

["Bill Garber" <willy46pa@comcast DOT net>]

"Charles" <spammeister12345@aol.com> wrote in message
MPG.1b74d54c9f99ef409896b5@news.verizon.net">news:MPG.1b74d54c9f99ef409896b5@news.verizon.net...
:
: Ok, I'm ready to do ADT with a Super Serial Card in my IIgs.
Does
: anyone have a place where I can look at a picture of a properly
: configured SSC before I begin?
:
: Drawings aren't making it easy for me since they're not exact
replicas
: and believe it or not, I've never ever used a Super Serial Card
before.
:
: I need to know how to flip all the little dip switches on the
card.
:
: 1. Which direction (up or down) is ON?
: 2. Which way is the switch supposed to be if it is ON?
: etc.

This ought to do you for setting up the card. Good Luck!

Name:           Apple SSC
Type:           Super Serial Card
Short description:
           The SSC gives the Apple ][ a serial port (RS232). Up
to
           19200 baud are possible. Full handshake is supported.
Installation:
           The card plugs into Slot 1, 2 or 3 of the Apple. Slot
1 is
           usually for a serial printer (Imagewriter), Slot 2 for
a
           modem and Slot 3 for a terminal.
           The DB25 connector goes to the printer/modem/terminal
line,
           the 10-pin connector on the other side of the cable
goes
           into the cable socket at the rear side of the card.
Jumper settings:
           The card has two jumpers and a additional jumper
block.
           The jumper block can be installed two ways:
                      1) Arrow pointing towards the word TERMINAL
                      2) Arrow pointing towards the word MODEM
           Jumpered as MODEM, it will wire thru, jumpered as
TERMINAL,
           it will twist 2-3, 4-5 and 6-20 (called null modem).
           The jumper switches are called SW1 and SW2, the
switches
           are numbered SW1-1 to SW1-7 and SW2-1 to SW2-7 from
left
           to right.

                      SW1-1      SW1-2     SW1-3    SW1-4
                      off        off       off      off
19200 baud
                      off        off       off      on
9600 baud
                      off        off       on       off
7200 baud
                      off        off       on       on
4800 baud
                      off        on        off      off
3600 baud
                      off        on        off      on
2400 baud
                      off        on        on       off
1800 baud
                      off        on        on       on
1200 baud
                      on         off       off      off
600 baud
                      on         off       off      on
300 baud
                      on         off       on       off
150 baud
                      on         off       on       on
135 baud
                      on         on        off      off
110 baud
                      on         on        off      on
75 baud
                      on         on        on       off
50 baud

                      SW2-1 off           2 stopbits
                      SW2-1 on            1 stopbit

                      SW2-2 off           no delay on carriage
return
                      SW2-2 on            1/4 sec delay

                      SW2-3      SW2-4
                      off        off     132 chars/line, apple
screen off
                      off        on       80 chars/line, apple
screen off
                      on         off      72 chars/line, apple
screen off
                      on         on       40 chars/line, apple
screen on

                      SW2-5 off           no line feed after
carrigae return
                      SW2-5 on            line feed

                      SW2-6 off           ignore interrupts
                      SW2-6 on            generate interrupts

                      SW1-7 on and SW2-7 off   pin 4 or 20 (clear
to send)
                      SW1-7 off and SW2-7 on   pin 19 (secondary
clear to send

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy46pa @ comcast DOT net
Change DOT to a dot to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.729 / Virus Database: 484 - Release Date: 7/28/04