[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Using SSC to transfer disk images
- Subject: Using SSC to transfer disk images
- From: "MechCD" <mechcd@bluebottle.com>
- Date: Mon, 26 Apr 2004 14:04:52 -0400
- Newsgroups: comp.sys.apple2
- Xref: archiver1.google.com comp.sys.apple2:5525
My super serial card II arrived in the mail today and I'm having quite a bit
of trouble getting it to do anything. I'm trying to use Windows Terminal to
type text onto the Apple IIe. I have a straight through cable, and have the
jumper block set to TERMINAL. The rest of the settings are 300bps,
communications mode, CTS, 1 stop bit, 7 data bits, odd parity, parity
disabled.
I have no clue what I'm doing wrong other than not having a null modem
cable. I did put the card in Slot 2, as IN#3 must do something completely
different than IN#2. When it was in slot 3 and i typed IN#3, it cleared the
screen and put a one character vertical bar in the upper left corner.