Re: LaserJet 4L

[The Wizard of Oz <wizard@emeraldcity.gov>]

On Sat, 27 Mar 2004 23:24:05 -0500, Greg Andrzejewski wrote:

> Hi,
>     I have been using the Harmonie drivers and a Grappler+ to print on an HP
> DeskJet 540. However, the IIgs refuses to print on my LaserJet 4L. When I
> try to print, the IIgs reports that printing is in progress, but nothing
> ever happens with the LaserJet. I have tried all 3 LaserJet drivers on the
> Harmonie disk, none work. Could this be something with the Grappler+ dip
> switch settings? What are the proper settings for a LaserJet 4L?

	One thing I found with my IIIp is it needed more memory. I added more and
no problem. Everything gets converted into a picture, sent to the printer,
and fired out. In this case there was too much detail for 1Meg to handle.
I boosted it up to 3Meg and it can handle all but the most detailed
pictures. What happened in my case was most of the picture was sent to the
printer. When it ran out of memory, it wasn't able to complete the picture
or accept any more data from the computer. This in effect means the
computer thinks it's still printing while the printer is actually stopped.

				Later
				Mike