Re: Transwarp GS

["Bill Garber" <willy46pa@comcast.net>]

"John" <twohandsfree@hotmail.com> wrote in message
e639cb5b.0312161712.75cd35c2@posting.google.com">news:e639cb5b.0312161712.75cd35c2@posting.google.com...
: FWIW .....
:
:   For my ZipGS I made it's CPU cable out of an old IDE HD cable
and a
: 40 pin insulation dipslacement connector from Jameco - nothing
: special, or maybe I was lucky.
:   Of course a Zip is not a Transwarp, but I haven't had any Zip
: related problems on this ROM 03 for years. (I try not to remove
or
: touch that cable.)

Thanks, I'll look up that connector. I think
the problem is that I have to reverse the pins
in the 40 pin IDE connector that comes from the
card itself. They may be getting damaged when I
press the cable back in. Probably should get new
ones. Once the wire is pressed between the forks
they can spread open and not make contact.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.544 / Virus Database: 338 - Release Date: 11/26/03