[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Well, back into a IIe I am
- Subject: Re: Well, back into a IIe I am
- From: mjmahon@aol.com (Michael J. Mahon)
- Date: 08 Dec 2003 19:20:40 GMT
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <3fd40062$1@news.uow.edu.au>
- Xref: archiver1.google.com comp.sys.apple2:1305
David Wilson wrote:
>Eric Smith <eric-no-spam-for-me@brouhaha.com> writes:
>
>>Robert Boucher <boucher1@alumni.utexas.net> writes:
>>> Isn't the Aux slot and the other slots different lengths? Also, is there
>>> enough room to put any card in the Aux slot other than one designed for
>>> the Aux slot?
>
>>The aux slot is mechanically and electrically different than "normal"
>>Apple II slots. Cards designed for the aux slot will not work in a normal
>>slot, and vice versa.
>
>>It is theoretically possible to make a card that will work in either slot
>>by having two separate edge connectors on the card, but I'm not aware of
>>this ever having been done, nor of any good reason to do it.
>
>Here in Australia (and other PAL color TV countries) the Apple IIe has
>the Aux slot in the middle of the motherboard in-line with slot 3
>(preventing you from using both slots at once). Apple made a 64K 80-column
>card with both edge connectors (but only used the rear 50 pin slot to get
>an additional voltage to run an on board video hybrid chip).
I'd always wondered why the PAL Apples had the AUX slot in line
with slot 3--picking up -12v sounds like the answer.
-michael
Check out amazing quality sound for 8-bit Apples on my
Home page: http://members.aol.com/MJMahon/