Re: More ADT Fun

["Bill Garber" <willy4SPAM6pa@comXcast.net>]

"Ralph Glatt" <julian814@hotmail.com> wrote in message
ce9c44dd.0310041229.1d774f00@posting.google.com">news:ce9c44dd.0310041229.1d774f00@posting.google.com...
> Okay, I downloaded ADT on my PC, and opened it. Managed to buy a cable
> to hook it up to my //c. Followed the instructions, went to download
> the ssc software to my //c, went fine for about five lines, then it
> stopped showing line numbers. I thought about this a bit, and decided,
> "well, when I use Proterm, the asci dump shows up fine on the screen,
> so I'll just direct that to the printer, print it out, and type it in
> later." Which I did. Typed it in, but it's saved as an Applesoft
> program, and it's supposed to be binary. I don't know if it matters or
> not, but I'm assuming it does, since it won't work. Any ideas out
> there?
>
> Ralph Glatt

Ralph, I have told you several times. ADT dump is sent to
the Serial modem port thru the Basic prompt via IN#2. Set
your baud rate on the PC term program to 300 baud. Now,
once you have done IN#2 no longer touch the IIc. Then go to
the PC and ASCII send, using my settings on Telix that I sent
to you, and send the ADT dump file thru. Do not use term
program on the IIc, it won't work. Also need a disk in slot 6,
drive 1 on the IIc to accept the ADT program once it is received.
If you have any further problems contact me and we'll get on
ICQ and do this thing.

Bill @ GarberStreet Enterprizez };-)
Web Site - http://garberstreet.netfirms.com
Email - willy4SPAM6pa@comXcast.net
Remove - SPAM and X to contact me



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.522 / Virus Database: 320 - Release Date: 9/30/03