Apple IIe Color Monitor connection.

["Bill Garber" <willy46pa@comcast.net>]

I recently had a bad RCA jack connection on my
IIe color composite monitor, so I carefully removed
the back of the case and the plate which holds the
power cable and noticed that the ground ring
had pulled away from the mounting. Next, I took out
my trusty soldering iron and roll of 60/40 solder and
ran a bead around the base of the ground ring at the
mounting. If you try this, be careful to only leave about
1/32" high bead of solder max, otherwise you will not
be able to plug on the cable end all the way, hence not
having a good positive tip connection. It works great.
The picture is now crystal clear and sharp as a tack.

Bill @ GarberStreet Enterprises };-)
Web Site - http://garberstreet.netfirms.com
Email - willy46pa@comcast.net



---
This email ain't infected, dude!

Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.490 / Virus Database: 289 - Release Date: 6/16/03