Re: Where is Ian Schmidt (or, can you help with my SoundMeister)?

["Rodney Hester" <rod72@optonline.net>]

"Michael J. Mahon" <mjmahon@aol.com> wrote in message
20030520000629.02127.00000305@mb-m12.aol.com">news:20030520000629.02127.00000305@mb-m12.aol.com...
> Rodney Hester wrote:
>
> >Just picked up a SoundMeister from eBay.  I'm delighted with the quality
of
> >the stereo output.
> >
> >However, I just can't seem to get anything to digitize through the mic
port.
> >Anything I record comes back as total silence.  Here's what I know:
> >
> >- The problem is slot-independent.  I've tried 1 and 4, with equal
results,
> >both set to Your Card.
>
> You mentioned trying different slots, but you didn't mention whether
> the jumper cable from the card to the Ensoniq audio input was
> connected.  It sounds like it isn't.

It is, else I couldn't get stereo output.  =)  It appears two pins on the
Ensoniq header (one hot, one ground) are used for digitizing, is that
correct?

Rodney