Re: Appletalk Imagewriter II

["Stephen Hartz" <SHartz@columbus.rr.com>]

Hey, did you flip the switch in the Imagewriter itself to enable AppleTalk??
(See the imagewriter manual or write back...) DIP switches:   SW2-4 must be
closed.
SHartz

"Marsha" <menacechgo@aol.com> wrote in message
news:Xns936C4E4E157B3menacechgoaolcom@206.141.192.32...
> [posted and mailed]
>
> "Greg Andrzejewski" <pressyourluck85@yahoo.com> wrote in
> a7acnYcI3IOtNTCjXTWcpA@comcast.com:">news:a7acnYcI3IOtNTCjXTWcpA@comcast.com:
>
> > I'm just trying to print with a GS/OS program. Not even Teach works. I
> > made an AppleShare 3.5" disk and put the printer drivers on it. It
> > worked, but only after selecting the printer, then restarting Teach.
>
> Just a thought,
> make sure the *:System:System.Setup:ATINIT file is NOT locked.
>
> If it were it might not tell you that it couldn't change/define the
> printer.
>
> Marsha
>