[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Caution on AP-64E EPROM Programmer

Subject: Re: Caution on AP-64E EPROM Programmer
From: "Mark Cummings" <NOTfigjams@primus.com.au>
Date: Mon, 7 Apr 2003 23:30:05 +1000
Newsgroups: comp.sys.apple2
Organization: iPrimus Customer - reports relating to abuse should be sent to abuse@iprimus.com.au
References: <3e8ae3cc_1@news.iprimus.com.au> <3e8aeb62_1@news.iprimus.com.au> <81Iia.1629$EO.376@fed1read07> <3e8d83a1_1@news.iprimus.com.au> <_esja.40152$7Im.25940@news04.bloor.is.net.cable.rogers.com> <3e8ed76b_1@news.iprimus.com.au>
Xref: archiver1.google.com comp.sys.apple2:29573

> I have started to hand disassemble some of the firmware on the AP64e, but
> it's fairly slow going.

someone suggested I use ORCA Disassembler to make it easier/quicker. Looking
into it I think the ORCA Disassembler is only suitable for 16-bit Apple IIGS
disassembly.

Am I right ?, or is there some way to make it disassemble 8-bit code ?, or

Is there another similar Symbolic Disassembler that would be suitable for
8-bit code ? (not necessarily on an Apple 2, but preferably)

Mark

Follow-Ups:
- Re: Caution on AP-64E EPROM Programmer
  - From: Marsha <menacechgo@aol.com>

References:
- Caution on AP-64E EPROM Programmer
  - From: "Mark Cummings" <NOTfigjams@primus.com.au>
- Re: Caution on AP-64E EPROM Programmer
  - From: "Mark Cummings" <figjams@primus.com.au>
- Re: Caution on AP-64E EPROM Programmer
  - From: salfter@salfter.dyndns.org (Scott Alfter)
- Re: Caution on AP-64E EPROM Programmer
  - From: "Mark Cummings" <NOTfigjams@primus.com.au>
- Re: Caution on AP-64E EPROM Programmer
  - From: "Glenn Jones" <rg.jones@rogers.com>
- Re: Caution on AP-64E EPROM Programmer
  - From: "Mark Cummings" <NOTfigjams@primus.com.au>

Prev by Date: Touch Screens
Next by Date: Re: Apple II case preferences....
Previous by thread: Re: Caution on AP-64E EPROM Programmer
Next by thread: Re: Caution on AP-64E EPROM Programmer
Index(es):
- Date
- Thread