Re: PC Transporter Failed

["Bryan Parkoff" <BParkoff@satx.rr.com>]

    I meant that slot 3 is not used while TransWarp GS is active.  It is
because slot 3 never flow the current from the power supply load nor the
current flows between TransWarp GS card and slot 3 connector.  It is done
through CPU socket only.  It is the same example that sound card is
installed in slot 4.  It does not have current flow between this card and
the slot connector.  I mean that both TransWarp GS card and sound card do
not NEED to use slot connector but it is designed to plug into slot
connector in order to hold the card vertically.

--
Yours Truly,

Bryan Parkoff
BParkoff@satx.rr.com
"Rob" <roberta@no-spam.inreach.com> wrote in message
news:MWm3a.116591$HN5.430431@rwcrnsc51.ops.asp.att.net...
> You have a few devices plugged in that you say is not used.  Despite the
> fact that you are not actually using them they are still plugged in and
> therefore putting a load on the powersupply, especially the Transwarp.
The
> Transwarp is a physical replacment for the original CPU therefore it is
> used, even if the system is switched to normal\unaccelerated speed.
>
>
> "Bryan Parkoff" <BParkoff@satx.rr.com> wrote in message
> IaCcnRC-jO4q-tGjXTWQkQ@giganews.com">news:IaCcnRC-jO4q-tGjXTWQkQ@giganews.com...
> >     It is true that I have a lot of cards in this system.  The
motherboard
> > is Apple IIgs ROM 03.  BlueDisk is in slot 2.  TransWarp GS is in slot 3
> > that is not used.  Sound card iis in slot 4 that is not used.
SuperDrive
> > card is in slot 5.  PC Transporter is in slot 6.  TurboIDE card is in
slot
> > 7.  It shows that only four cards in slot 2, 5, 6, and 7 are used with
> > power.  One SuperDrive and one AppleDrive are connected to SuperDrive
> card.
> > Two 5.25" drives are connected to slot 6 connector (I don't use them if
I
> > use PCT).  Second SuperDrive connects to TransDrive.  TransDrive
connects
> to
> > PC Transporter.
> >     Do you think that it is a lot of hardware that it might take too
much
> > power?  I know the fact is that Apple IIgs ROM 03 always receive enough
> > power better than Apple IIgs ROM 01.
> >     I already ran diagnostic software on CV RAM card (GS RAM Plus--Not
> from
> > AE).  It shows no errors.  I already ran another diagnostic software for
> PC
> > Transporter.  It shows no errors neither.
> >     Do you have idea that it might cause problem?  Often, I ran GS/OS
> System
> > 6.0.1 that works fine.  Sometimes, it begins to read the volume for hard
> > drive, the machine language breaks before "*" prompt appears in the
> screen.
> > It may be the same problem with PC Transporter that breaks.
> >     I can't figure out how it has caused problem however I show all
> > diagnostic tests to be normal without errors.
> >
> > --
> > Yours Truly,
> >
> > Bryan Parkoff
> > BParkoff@satx.rr.com
> > "Liam Busey" <buseyl@yahoo.com> wrote in message
> > v4okeds4e6q0fa@corp.supernews.com">news:v4okeds4e6q0fa@corp.supernews.com...
> > >
> > > "Bryan Parkoff" <BParkoff@satx.rr.com> wrote in message
> > > 3mSdnbHhSKCkjdajXTWQlg@giganews.com">news:3mSdnbHhSKCkjdajXTWQlg@giganews.com...
> > >
> > > -snip PC Transporter problems-
> > >
> > > The PC Transporter is a real power hog. Do you have a lot of cards in
> your
> > > system? You may want to try running it all by itself.
> > >
> > > Have you tried the diagnostic program? One of your RAM chips might
have
> > > popped out of its socket.
> > >
> > > - Liam
> > >
> > >
> >
> >
>
>