Re: Need modem advice

["Charles Claypoole" <1@rainbowsendgs.no-ip.com>]

Its more than likely the AT code... I run a Modem Blaster 56k on mine and it
works fine...  If you have the manual make sure the codes that are there
match your modem..

Try just ATX4 and see if it inits.. then work backwards..  works for me..

Charles

"Simon Williams" <*email*@*luddite.ca*> wrote in message
24216.JCGMDBWE@news.telusplanet.net">news:24216.JCGMDBWE@news.telusplanet.net...
> I'm trying to get a modem working on my GS with ProTERM, but have no
> experience with the intricacies of this procedure... I have the ProTERM
> diskette, a new high speed modem cable and two modems -- a USR Sportster
> 28.8 Fax Modem and a GVC V.34 28.8 Fax Modem. I'm using the GS's built-
> in modem port, presuming that PT overrides the control panel settings
> for the port (right?).
> So far I've tried about 8 million different init strings with both
> modems but to no avail... I can see their little lights flashing like
> they're good to go, but then PT says 'can't init the modem'
> Is it possible that I need to find an older/slower modem?
>
> --
> Simon Williams
> Luddite Enterprises
> http://www.luddite.ca
>