Re: SST back to real apple?

[jon@i-manila.com (Jon Co)]

OK. I have temporarily given up on this one (temporarily, meaning I
intend to get back to it later on)  I have a different but related
problem.  I want to transfer 800K disk images to my IIGS.  First the
images came in 2mg format. No problem (or so i thought) just load it
into emulator and create a .SHK image out of it. Ok har har, now got a
.SHK image uh.. how do i get it out of the emulator.  If I had my mac
(an old 6100/66) I could use its internal superdrive to write 800K
disks and stick the disk to my IIGS.  Unfortunately, someone borrowed
the unit and I am unable (at the moment) to get a hold of it.  Would
there be a way to segment the large (400+K) file in the emulator into
140k pieces,  this way I could transfer them using ADT and re-combine
them on the IIGS.  Or if there were some way to extract the prodos
file into a standard PC file in the emulator.  I read about some of
these in the FAQ but most of the links are already dead.
also, I think the IWM in my IIGS is broken.  The IIGS is a ROM03. 
firstly, any first 5 1/4 drives you attach to the built in disk port
is continously running, whether chained behind a 3.5 or direct to
port, drive 1 is continously running.  I try my Duodisk, I try my disk
//c, I try my super5 teac clone same result.  so right now my slots
have slot 6 set to "your card" and I use a disk II controller card. 
The other problem is prodos (whether 8 or GSOS) doesnt "see" any
second 3.5 drives attached.  it only sees a maximum of one 3.5" drive.
 Is this normal for a rom03? or is my IWM cooked?