[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: MultiRAM RGB Problem



Paul H. Lee wrote:

I have a MultiRAM RGB connected to my Apple //e Platinum. I had a
third-party RGB monitor connected to it and all was well.  I since
sold that monitor and have tried two different Apple RGB monitors that
were made for the //GS.  Model number A2M6014.  The problem is that
with the Aplpe monitors, everything is RED - as if the Green and/or
Blue gun is not firing right.  The card worked fine with the other
monitor, just not either ot the two Apple monitors.  The Apple
monitors work fine on my //GS boxes.  So it seems that the card is
good, and the monitors are good - just not working together.  Anybody
have any ideas -- short or buying ANOTHER monitor or ANOTHER card??


I've used that card with a IIgs monitor(A2M6014). The only problem
I had was two colours were reversed. Red and green I think(it was
about ten years ago). So I made up a new cable with those two wires
switched and everything was fine.
You might examine the cables, red, blue and green are each on separate wires. If that wire's broken then you lose that colour. 

Maybe your third party monitor used an oddball pinout on it's cable.
You could check check cable coming off the card to see if it's wired
normally

Wayne