Re: Help with ADT

[Romeo <boogiejr@hotmail.com>]

I recently got back into using ADT to transfer .dsk images back to my
IIgs, and got a similar error. It turned out, I had the
"Terminal/Modem" jumper set wrong.

If you're using a null modem cable, you should have the arrow on the
jumper pointing to modem. If you're using a straight-through cable, it
should be set to terminal.

Oh, I don't know if it makes any difference, but I'm using an SSC 2.

Romeo

On Sun, 3 Nov 2002 01:08:28 -0500, "Greg Andrzejewski"
<pressyourluck85@yahoo.com> wrote:

>Hello,
>    I recently got a ROM 1 IIgs without any software. The DOS 3.3 and ADT
>v1.21 dumps went fine with Hyperterminal and a Super Serial Card, but I
>can't seem to get ADT to work. When I try to receive a disk image on the
>IIgs using ATDwin, nothing happens once it says "Waiting for PC to reply."
>The MS-DOS version performs similarly, execpt the PC says "00: Unknown
>error" or somthing like that. Any ideas on what could be wrong? If not, are
>there any other ways of getting Apple II disk images onto a floppy? Thanks.
>