Re: Set up a GS with CP/M?

["Joel" <joelbuckley54.nospam.@hotmail.com>]

I have a real Microsoft softcard. Worked fine in ][+ and //e,
Didn't work in //gs.
Can't remember if it worked with speed at 1 MHz.
But there was some incompatibility.
AE's Z-80 card (not an MS clone) worked ok with gs.


"Lazarus I. Long" <me@lazilong.com> wrote in message
68a2ec1b.0210282038.6c1dcd43@posting.google.com">news:68a2ec1b.0210282038.6c1dcd43@posting.google.com...
> I've got a GS (rom 1?).  got a scsi card in slot 7, and I put the CP/M
> card in slot 4.
>
> when I boot with a (presumably good) CP/M disk:
>
> if slot 4 is set to "Mouse Card"  I get the "No Z80 Found" startup
> message, and no light on the card.  makes sense, indicates to me the
> disk is good.
>
> if slot 4 is set to "Your Card", then the little light on the CP/M
> card goes on, but the machine just hangs.
>
> it's one of those cards with the 4 dip switches (all off) the
> micorshaft clone.. or something.
>
> any ideas?