Re: Got everything, now how do I start it?

[MagerValp <MagerValp@cling.gu.se>]

>>>>> "WS" == Wayne Stewart <waynes@telus.spamless.net> writes:

WS> If the option "Change Disk" doesn't give you any other choices,
WS> then it can't see your hard drive for some reason.

WS> Try booting a utility like Copy II Plus to see if it sees your
WS> hard drive. If it doesn't here's a few things to lok at.

Where can I find that?

WS> Make sure the hard drive is turned on and up to speed before you
WS> turn on the IIgs.

I noticed that the disk I was using didn't spin up on the IIgs, but it
spins up fine on a Mac G3. I swapped it for an old Apple 40 MB drive,
but that one only has an HFS partition on it. I was going to ask how
to partition it, but a requester popped up when I was fooling around
with the Install disk.

WS> Some of the Rev C SCSI cards don't supply term power without a
WS> mod.

Any way of determining that? This is a Rev B card that has been
upgraded with a Rev C rom.

WS> Something must supply term power, either the card, the drive, or an
WS> Active terminator.

I'll see if I can find an active terminator somewhere...

Thanks.

-- 
    ___          .     .  .         .       . +  .         .      o   
  _|___|_   +   .  +     .     +         .  Per Olofsson, arkadspelare
    o-o    .      .     .   o         +          MagerValp@cling.gu.se
     -       +            +    .     http://www.cling.gu.se/~cl3polof/