Re: Apple M0130 -> SuperDrive mech?

["Paul Grammens" <grammens@svn.net>]

This is right on advice. The 400K drive is a lot taller than the 800K and
1.44 drives, but I have used the cable from a junked 400K drive to connect
bare 800K and 1.44 drives for testing.
-Paul

"bill malcolm" <wm65805@alltel.net> wrote in message
3D9C189F.1DBFF8ED@alltel.net">news:3D9C189F.1DBFF8ED@alltel.net...
> The mac 400 case is not a good match for 800k for 1.44 drives .
> You can connect the cable to the 880k or 1.44 , but mounting the is a
> problem.
>
> You may need to build a case for it --  ....
>
>
>
> MagerValp wrote:
>
> > I have an Apple M0130 400K drive that doesn't appear to work with my
> > IIgs. It's just a cable and a mech in that case; can I replace the
> > mech with a SuperDrive mech and use it to read 800K disks?
> >
> > --
> >     ___          .     .  .         .       . +  .         .      o
> >   _|___|_   +   .  +     .     +         .  Per Olofsson, arkadspelare
> >     o-o    .      .     .   o         +          MagerValp@cling.gu.se
> >      -       +            +    .     http://www.cling.gu.se/~cl3polof/
>