Re: Null Modem driver for GBBS?

["Terry & Utahna Olsen" <tolsen64@nospam.boycot.dns2go.com>]

Well, to tell the bbs to reset, I drop the DCD line, and the bbs resets.
Then it sends modem commands and waits for a response...my problem is, that
when I drop the DCD line, the Gateway program never sees the AT command.
Even if I immediately bring the DCD line back up, it's too late, GBBS has
already sent the AT command and is listening for the reply, and i don't want
to just blindly send 0's to the BBS assuming that it received them...there
could come a situation where it didn't see the 0 and continues to just sit
there...I'd rather have the two talk back and forth.

"Charles Claypoole" <Charles.Claypoole@p0.f114.n117.z1.fidonet.org> wrote in
message 000003a1@Bungholio.net">news:000003a1@Bungholio.net...
>
> T&UO> From: "Terry & Utahna Olsen" <tolsen64@nospam.boycot.dns2go.com>
> T&UO>
> T&UO> Is there a null modem driver for GBBS???  It would sure be a lot
easier
> T&UO> to get this thing to work "correctly" if I could get GBBS to stop
> T&UO> sending modem commands and refusing to do anything else until it
gets a
> T&UO> reply.
> T&UO>
> T&UO>
>
> Hi Terry,
>
> Well, in BBSLink if you are using the null modem setup, when GBBS or other
BBS
> sends a at command BBSLink will reply w/ "OK" or other hayes type
response.
> Maybe that will help  ?  I use the dialup setup , but it will do null
modem
> connects also.
>
> Charles
> ~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.~!~.
> ~ The Rainbow's End Internet Gateway
> ! telnet://rainbowsendgs.dns2go.com
> ~  User FidoNet address: 1:117/114