Re: .nib Images to real Apple disks

[aguilar@onixinformatica.com.br (Jose Carlos Lord Apple)]

>      Some possible problems are ...
> 
> o- When you made your images on the PC, you used one or two .dsk images
> which were in ProDOS order. These are rare; but, there are some. (ProDOS
> order disk images are usually .po files.)
> 
> As far as I know, ADT does not try to check the sector ordering of
> a .dsk image. So, a ProDOS ordered image with a name ending in ".dsk"
> might well be sent and end up mixed around when written in DOS 3.3
> order on the target diskette.
> 
Hummm ... The .DSK images that I did on emulator are DOS 3.3 !!!! Must
I need 2 ProDOS images before use SST ?

> o- There are several .nib images in the M&M II set. I'm pretty sure that
> Only the first image (Disk A) is bootable. If you sent one of the other
> images, it probably would not boot.
> 
I got the first one.

> o- M&M II requires an enhanced //e (or later model) Apple II. If your //e
> does not have 128k or if it can not display double-hires, the boot disk
> may hang during booting.
> 
My //e has 1 mb of RAM.
> 
> Rubywand

Thanks a lot for your help !!!