[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Central Point software Board ??
- Subject: Re: Central Point software Board ??
- From: "Tom Zuchowski" <tzuchow@attglobal.net>
- Date: Sat, 24 Aug 2002 11:05:28 -0400
- Newsgroups: comp.sys.apple2
- Organization: Global Network Services - Remote Access Mail & News Services
- References: <clairmnt-8D4A5B.19204519082002@news-server> <3D6576C9.8BB98D9F@alltel.net>
- Xref: archiver1.google.com comp.sys.apple2:22379
My UDC's worked fine with mixed 3.5 and 5.25 drives. According to the manual
that came with the board, it was picky about what order you attached the
drives, both the order of the drives and which connector you used. The
manual had example setups for all kinds of mixed drives.
Tom Zuchowski
"bill malcolm" <wm65805@alltel.net> wrote in message
3D6576C9.8BB98D9F@alltel.net">news:3D6576C9.8BB98D9F@alltel.net...
> Is this the UDC board ? If so it works poorly -- in my tests. It can be
> used to run 3.5 drives or 5 1/4, but did not like mixed setup use either
> on but not both.
>
> bill ..