[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Tape Cassete Does Not Work on II/II+!!!
- Subject: Re: Tape Cassete Does Not Work on II/II+!!!
- From: Stephen Shaw <bottrawler@junkbuster.zzn.com>
- Date: Sun, 21 Jul 2002 20:20:06 +0000 (UTC)
- Cache-post-path: proxy.storm.co.za!vd_apple2@venus.itns.co.za
- Newsgroups: comp.sys.apple2
- Organization: A poorly-installed InterNetNews site
- References: <Dk6Y8.92063$iX5.4137014@bin3.nnrp.aus1.giganews.com>
- User-agent: MultiMail/0.43 (SOUP; Linux)
- Xref: archiver1.google.com comp.sys.apple2:21517
On Sun, 14 Jul 2002 03:36:03 GMT, Bryan Parkoff wrote:
> Tape Cassete Does Not Work on II/II+!!!
>
> Apple II+ is without any slot 0-7 (including slot 0 card) controller
> cards. It appears AppleSoft BASIC into the screen after it is powered up.
> I connected a cable from II+'s 'Out' to tape cassette's MIC port and
> II+'s from 'In' to tape cassette's earphone port.
> I typed below.
>
> 10 HOME
> 20 PRINT "THIS IS A TEST."
>
> Turn on Apple II+
> Turn on tape cassette
> Push Record button to record tape cassette
> Type: "SAVE" and press Return
>
> "SAVE" is completed before I stop recording.
>
>
> I tried to load below, but it does not work.
>
> Turn on Apple II+
> Turn on tape cassette
> Push Play button to play tape cassette
> Type: "LOAD" and press Return
>
> An error message appears in the screen: "ERR" after the tape is loaded.
>
> Do you have idea what is wrong with this procedure? I can be able to
> hear pitch tone from the tape after it was SAVED last time. Please advise.
The record volume setting is quite critical - fiddle with it a bit between
tries.
>
> Bryan Parkoff
> BParkoff@satx.rr.com
--
--
Real email address : stephen (at) junkbuster (dot) zzn (dot) com
It takes 42 muscles to frown but only 4 to reach out and slap someone