[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: ADT Question
- To: bob3k@cwnet.com
- Subject: Re: ADT Question
- From: noone@nowhere.net
- Date: Thu, 20 Jun 2002 14:09:54 -0500
- Newsgroups: comp.sys.apple2
- Organization: University of Nebraska-Lincoln
- References: <3d12237f$1_1@news3.cwnet.com>
- Xref: archiver1.google.com comp.sys.apple2:20624
This FAQ should be a good start.
http://home.swbell.net/rubywand/Csa2T1TCOM.html#006
We can't actually answer that question without knowing which Apple II
and other computer you are planning on wiring together. A IIe/+ (or
other slotted Apple or clone) will most likely have a Super Serial Card
(SSC) with a 25pin D female, a IIc will have a 5 pin round plug, a IIC+
or IIGs will have the 8 pin round plug and then there is the other PC
you are hooking it to. Please be more specific as to what you wish to
hook together or check the ADT documentation and the FAQs for the
correct answer.
Thankx,
Ed
Bob3000 wrote:
>
> How do I wire a cable for use with adt?