Re: Microsoft Softcard: MBASIC on't run

["Don Kelly" <don.kelly@sympatico.ca>]

Try removing all the cards except Z80 and Disk controller Z80 in slot 5. If
that works plug each card back in and see what happens.


"Chris Clement" <chrisclement@charter.net> wrote in message
ufkpdstifp029a@corp.supernews.com">news:ufkpdstifp029a@corp.supernews.com...
>
> "Mike" <mike@bogus.address.net> wrote in message
> ufko0urhu3ma46@corp.supernews.com">news:ufko0urhu3ma46@corp.supernews.com...
> > Chris Clement wrote:
> >
> > > Got another issue I'm trying to figure out.  When I run my II+ in CP/M
> and
> > > try to start basic by typing "MBASIC", the prompt just sits there and
> > > blinks on the next line and will not accept anymore keyboard commands.
> > >
> > > Any ideas?  Thanks.
> > >
> > > Chris
> > >
> > > Hardware:
> > > Apple II+
> > > Videx Videoterm 80 column card
> > > Apple Language Card
> > > Microsoft Softcard
> > > Serial card
> > > Printer card
> > > Disk Interface
> >
> >
> > I've got a II+ with similar hardware, and no problems with mbasic.  I'd
> try
> > a different disk and see if that changes anything.
>
>
> Tried that.  No change.  Thanks tho.
>
>