Re: Help with Super Serial Card

["Will Kranz" <w_kranz@conknet.com>]

"David Empson" <dempson@actrix.gen.nz> wrote in message
1fbjalq.1lb5u5g1o90ni8N%dempson@actrix.gen.nz">news:1fbjalq.1lb5u5g1o90ni8N%dempson@actrix.gen.nz...
> > > Any more hints about this? Are there other command options?
>
> Heaps.  Hopefully this is covered in the FAQ for comp.sys.apple2.
I have been using the FAQ series at
http://home.swbell.net/rubywand/
In particular its section titled Csa2T1TCOM
Question 14 covers some of the dips switches.
I also found similar dip switch info in:
http://www.geocities.com/jonrelay/software/a2info/ajsscdip.htm
http://www.ee.ualberta.ca/~schmaus/elcts/2ser.html
  the 2nd is by David Empson <grin> and it says the modem
  block determines the default control character.  Maybe I'll
  do some more trial and error!

http://home.swbell.net/rubywand/R031SSCPRG.TXT
covers the SSC register format nicely.

I have definately not seen anything on the firmware/
command line options we talked about here.  Either
I'm missing another link, or the FAQ could use another
Question/Answer pair!

Comments from both of you have been very useful,
thanks