Re: mass storage for Apple //c

[Riccardo <rigreco.grc@gmail.com>]

Il giorno martedì 21 maggio 2013 07:05:04 UTC+2, Ivan X ha scritto:
> On Monday, May 20, 2013 2:09:06 PM UTC-4, Riccardo wrote:
> 
> > > I'm kind of excited about this. And the Raspberry Pi model A (the $25 one with only a single USB and no Ethernet) can supposedly be powered with 5v 300 mA, which makes me wonder if the 12v 300 mA pin on the //c video expansion port can be used with some sort of device to reduce the voltage, and then the Pi becomes a true self-contained storage device for the //c. (I'm completely clueless when it comes to electricity, so I don't know how viable this is.)
> 
> > 
> 
> > 
> 
> > 
> 
> > You can use +5V - GND from: External disk port, Game port or direct from internal power supply grid by two wires (but is a rough work to see).
> 
> > 
> 
> > 
> 
> > 
> 
> > Ric.
> 
> 
> 
> There's an excellent idea. I know Apple says that you're not supposed to draw more than 100 mA from the +5V pin on the game port -- does anyone have any idea what the max current available from the +5V pin on the disk connector is?

The Maximum supply currents from internal converter are:

(Max Total power is 25 W)

+5V --> 1.5 A
+12V --> 0.6 A

- Be careful! If the currents are over this limits for few millisecond it can be like a short circuit and damage the circuits of the internal converter - 

(see pag. 234 of Apple IIc Technical Reference Manual)

Ric.