Re: audio out from IIc connector

[Michael J. Mahon <mjmahon@aol.com>]

Ivan X <ivan@ivanx.com> wrote:
> I have never really understood electronics at all. I can solder a bit,
> and get what it means for a circuit to be  open or closed, but that's about all.
> 
> I have an Apple IIc Plus, which notably lacks a headphone jack. But audio
> out is available on pin 5 of the video expansion connector, as detailed by Apple here:
> 
> http://support.apple.com/kb/TA39895
> 
> it says pin 5 is: 1VSOUND One-volt sound signal from pin 5 of the audio
> hybrid circuit (AUD).
> 
> Do any of you smart people know what would I need to do to adapt this to
> line level? I assume I can't just take the raw signal (and the GND signal
> on pin 13) and call it a day. Or maybe I can. This is why I'm asking.
> 
> Thanks,
> Ivan.

That should work fine, Ivan. It's a "line-level" audio output. 

-michael - NadaNet 3.1 and AppleCrate II: http://home.comcast.net/~mjmahon