[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Ultrawarp...

In article <f36380c3-c131-40b9-bd97-3d8313b3d66a@googlegroups.com>,
STYNX  <stynx@gmx.de> wrote:
>I cannot get to the setup of the RamFast with the Ultrawarp enabled
>(even at 1Mhz). I deactivated the DMA without the Ultrawarp installed
>but no luck so far since the DMA-Setting seems to be reset if i reboot
>with the UW installed. 
>
>[...]
>
>I have found no method to disable DMA by hardware (Rev.D RamFast) like a
>jumper or dip-switch before booting, since there is only the
>termination-power jumper.

Hmm...no switches?  My RamFAST is a rev. C, which IIRC has a couple of
switches (one tells the card if it's in a IIGS or a IIe, and I think there's
one to enable/disable DMA).  No wonder it was easy to get running with a
RocketChip.

(Also IIRC, wasn't the rev. D RamFAST intended more for use in the IIGS than
in the IIe?)

  _/_
 / v \ Scott Alfter (remove the obvious to send mail)
(IIGS( http://alfter.us/            Top-posting!
 \_^_/                              >What's the most annoying thing on Usenet?