Re: TransWarpGS Error

[Conrad <conrad.russo@gmail.com>]

On Oct 11, 7:14 pm, gbo...@bigpond.com wrote:
> Conrad,
> are those transwarp error codes.
> If so the 06XX is related to speed control test.
>
> Geoff

Hi Geoff,

Yes those are the codes from the transwarp failure screen. When I
switch on the GS I don't get any system beep or anything I get a
momentary checkerboard and then the transwarp failure (call AE service
dpt. and etc) screen with those error codes. I think the oscillator
was suspect, it was below stock speed (25MHz) and when I examined it a
lead fell off so I bought a new oscillator today (32MHz). I'm also in
the process of soldering together a -12v to -5v regulator so I can
test it with an ATX power supply that's way over spec since the person
who sold me the twgs said it needs a beefier supply to work reliably.
Will get back with the results in an hour or 2.

Conrad