Re: Virtual serial drive

[Kevin <kevin@hackaday.com>]

On Sunday, September 2, 2012 9:13:36 AM UTC-5, (unknown) wrote:
> On Saturday, September 1, 2012 6:04:03 AM UTC-7, Ric wrote:
> 
> > How can i create a serial drive for apple II, i found Apple2VirtualDrive at this link  ftp://ftp.apple.asimov.net/pub/apple_II/utility/, but I don't know how to do.
> 
> 
> 
> 
> 
> See if you can contact Gary Becker, he had that serial drive setup working for his apple FPGA project.
> 
> 
> 
> Rich

I poked around with it... not with much luck, but here is what I have

I tried using the shk file with adt, and when I rebooted I got an apple commnder notice and it doesnt boot. So I went in with cider press and snagged the serial.drive bin file and plopped it on a fresh prodos disk image.

Started the host software from a windows command line telling it what com port and hard disk image I wanted to use

Rebooted, brun serial.drive, typed bye to exit applesoft, hit tab to switch volumes and my //C barfs, I dont know if this is cause something is wrong, or if its just the fact that this thing is hard wired to 19200bps and my rom 255 C is just sending out junk