[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Robo-1000 and IIgs compatibility?
- Subject: Robo-1000 and IIgs compatibility?
- From: Antoine Vignau <antoine.vignau@laposte.net>
- Date: Wed, 23 May 2012 12:47:14 -0700 (PDT)
- Complaints-to: groups-abuse@google.com
- Injection-info: em1g2000vbb.googlegroups.com; posting-host=88.174.196.55; posting-account=c4quJwoAAABUj_DOmUN3HIuXxN1tF7gT
- Newsgroups: comp.sys.apple2
- Organization: http://groups.google.com
- User-agent: G2/1.0
Dear All,
I own a Robo-1000 package (https://picasaweb.google.com/
104707687928913128396/AppleIIRobo1000), the first 3D device for the
Apple II.
I was wondering where to connect one of the connector on an Apple
IIgs, knowing that the 16-pin interface connects to the I/O port of an
Apple II. But the controller lead also includes a single wire breakout
which is to be connected to the +12V connector of the 4-pin auxiliary
video connector of an Apple II+ or IIe.
The question is: on an Apple IIgs, where should I connect that extra
cable?
Yours ideas are welcome,
Antoine.thesolderingking.edu