Re: ADT on a //c

[MeccaDragon <idont@wantspam.com>]

Yea, I figured this out after reading through some more messages in
the group. The file though still doesnt seem to want to work after I
download it. I try to type INIT HELLO but all I get is a syntax error.
It's weird too because once it dumps the whole text file it never goes
out of the * prompt mode called by the call -151 (I use Ctrl+C to brak
then try the command) I set my line delay to 40 in Hyperterminal,
(This is confusing cause in one part of the page it says 40 and then
down further it says 400) but this doesnt seem to make a difference at
all. 


On 1 Mar 2002 08:43:12 -0800, r_beaudry@hotmail.com (Rich Beaudry)
wrote:

>MeccaDragon <idont@wantspam.com> wrote in message news:<ks5u7ucnr2m3839bb8p7o4hugciofhta92@4ax.com>...
>> Oops I forgot to add that I did read the FAQ on downloading the DOS
>> 3.3 thing to memory but everytime I try to download that dmp file it
>> doesn't work after it's done. Maybe because there is other stuff in
>> memory because I have to boot ProDos to get to a prompt instead of the
>> check disk drive thing? Or does some modification need to be done for
>> the dumpfile to work on the 2c??
>
>You DON'T gave to boot a disk to get to a prompt.  You can turn the
>computer on, with NO disk in the drive.  When you get the "Check Disk
>Drive" message (or even if the drive just continually tries to find a
>disk), press CONTROL-RESET, and you should get the Applesoft prompt,
>"]".  At that point, you can connect cables, do the IN#2 thing, etc.,
>etc.
>
>Rich B.



-----=  Posted via Newsfeeds.Com, Uncensored Usenet News  =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
 Check out our new Unlimited Server. No Download or Time Limits!
-----==  Over 80,000 Newsgroups - 19 Different Servers!  ==-----