Re: Applicard CP/M partition on CFFA3000?

[EricN <ericn247@gmail.com>]

On Nov 16, 8:41 am, Steven Hirsch <snhir...@gmail.com> wrote:
> On 11/16/2011 08:46 AM, David Schmidt wrote:
>
> Are the folks wrestling with ProPartition and the hd driver following the
> directions carefully?  If so, this is bizarre.  I'm starting to wonder if
> there isn't a corrupted distribution of my code floating around, since it's
> worked fine for a lot of folks.

I'm using the ProPart image from Asimov: ftp://ftp.apple.asimov.net/pub/apple_II/images/cpm/os/

I've seen the Pro/Part software exit out to the CP/M prompt like David
described above when I tried to run it on my emulator with a non-PCPI
card. With my Applicard the software lets you get through all of the
partitioning steps, starts to write out the data and then seems to get
stuck on the third step where it's trying to write data blocks.

> Still just guessing.  When my CFFA3000 gets here, I'll try an install and see
> what transpires.
Thanks.  The CFFA3000 is a very nice piece of hardware to have
regardless of CP/M support, but it would be very nice to have both
ProDOS and CP/M functionality on the card.