[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Transfer From IIgs to PC Successful--Read Please

Subject: Re: Transfer From IIgs to PC Successful--Read Please
From: CUTjblakeney@sympatico.ca (Jeff Blakeney)
Date: Tue, 18 Dec 2001 16:20:04 GMT
Newsgroups: comp.sys.apple2, comp.sys.apple2.marketplace, comp.sys.apple2.programmer, comp.sys.apple2.usergroups
Organization: Bell Sympatico
References: <xdpT7.217348$YD.17203688@news2.aus1.giganews.com>
Xref: archiver1.google.com comp.sys.apple2:15758 comp.sys.apple2.marketplace:2252 comp.sys.apple2.programmer:964 comp.sys.apple2.usergroups:882

On Mon, 17 Dec 2001 16:39:57 GMT, "Bryan Parkoff"
<BParkoff@satx.rr.com> wrote:

>    I shrinked a whole 3.5" diskette within .SDK extension by using ShrinkIt
>v3.4.  I formatted HFS format on 1.44MB diskette through BlueDisk controller
>card before I copied .SDK on it.  I put it into my PC by using MacOpener
>program before I copied .SDK into FAT32 format.  I tried to nulib .SDK back
>to the original size, but nulib failed.

The only thing I can think of is that MacOpener is not copying the
file from the HFS floppy to your FAT32 drive properly.  It is possible
that MacOpener has an option to convert Mac text files to PC text
files and if this option is on when copying an SDK file, then it will
corrupt the file.  Make sure that MacOpener is doing a binary copy and
not trying to do any text conversions.

--
 Jeff Blakeney - Dean of the Apple II Unversity on A2Central.com
               - CUT the obvious from my address to e-mail me

References:
- Transfer From IIgs to PC Successful--Read Please
  - From: "Bryan Parkoff" <BParkoff@satx.rr.com>

Prev by Date: Re: Copy II Plus would be illegal today
Next by Date: Re: Transfer From IIgs to PC Successful--Read Please
Previous by thread: Re: Transfer From IIgs to PC Successful--Read Please
Next by thread: Re: Transfer From IIgs to PC Successful--Read Please
Index(es):
- Date
- Thread